You can enjoy high-quality audio playback from the D/A converter built in to this unit by inputting music files into this unit from a computer via USB connection.
We support America's small businesses. The SBA connects entrepreneurs with lenders and funding to help them plan, start and grow their business. A go-to source of information about bicycle maintenance, repair and customization. D&M Holdings Inc. Modified Date: Wed Nov 13 16:00:00 UTC 2019: Device Type: RECEIVER: Control Method: IP Version: 107: Certified: TRUE: Supported OS Version: All Control4 OS versions 1.7.4 and above. Click to download driver. Marantz SR6010 Manufacturer: Marantz: Model: SR6010 SerialIP Creator: D&M Holdings Inc. Modified Date: Fri Jun 23.
Before USB connecting this unit to your computer, install the driver software in your computer.
Also, you can use whichever commercially available or downloadable player software you like to playback files on your computer.
OS
Mac OS X 10.6.3 or later
USB 2.0: USB High speed/USB Audio Class Ver.2.0
Installing the dedicated driver link
Audio Device Settings link
The driver software cannot be installed correctly if your PC is connected to the unit by a USB cable.
If the unit and your computer are connected by a USB cable and the computer is switched on before installation, disconnect the USB and restart the computer.
The installation starts. Do not perform any operation on the PC until the installation is completed.
For the connection procedure, refer to the “Connecting a PC or Mac” link section.
When the unit power is turned on, the PC automatically finds and connects to the unit.
When there is a checkmark for a different device, click “Marantz USB Audio” and “Set Default”.
Outputs a TEST signal from the PC and checks the audio output from the USB-DAC function.
The Digital Audio Interface Properties window is displayed.
It is recommended that “2 channel, 24 bit, 192000 Hz (Studio Quality)” is selected.
Check that audio from this unit is output from the PC.
The dedicated driver must be installed in the PC before this unit is connected to a PC. Operation will not occur correctly if connected to the PC before the dedicated driver has been installed. Moreover, if the PC is running Windows XP as its OS, the PC’s speed will decrease significantly, and a PC restart may be required.
D&m Holdings Driver Download 64-bit
Operation may fail in some PC hardware and software configurations.
If a different device is checked, select and “Secondary click” on “HD-DAC1”, and then select “Use this device for sound output”.
It is normally recommended to set the format to “192000.0 Hz” and “2ch-24 bit Interger”.
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a computer. link
D'arcy Carden
The digital audio signal that is being input is shown as follows in the display.
(xxxx is the sampling frequency.)
If the sampling frequency cannot be detected, “Unlocked” will be displayed.
“Unsupported” is displayed when audio signals that are not supported by this unit are input.
Perform operations such as playback and pause on the computer. At this time, you cannot perform operations with buttons on this unit or the remote control.
You can also control the volume and equalizer on the computer. Enjoy playing music at the desired volume.
When this unit is functioning as a D/A converter, sound is not output from the computer’s speakers.
If the computer is disconnected from this unit while the computer music playback software is running, the playback software may freeze. Always exit the playback software before disconnecting the computer.
When an error occurs on the computer, disconnect the USB cable and restart the computer.
The sampling frequency of the music playback software and sampling frequency displayed on this unit may differ.
Use a cable that is 3 m or less to connect to the computer.